Hydraulic Swing Beam Guillotine
Standard Equipment and Features
The Guillotine is an all steel welded mono-block constructed and includes the following;
- CE Certified including Front Finger Guard and Optical Rear Safety Guard
- Rapid and precise blade clearance adjustment by single handle on the side frame
- Fixed cutting angle
- Shadow line illumination
- Hydraulic and electrical overload protection
- One off 1.0M Ruled Squaring Arm with tilting stop
- two off 1.0M Front Support Arms
- one off 1.0M Rules Front Support Arm with tilting stop
- Bed infill plates with ball transfers
- Hand Movable Foot Pedal control including emergency stop
- instructions and Maintenance Manuals
- High quality shear blades
- Oil Tank
- Service Kit
Colours are light/dark grey and yellow.
The Motorized Backguage is AC driven with LED Digital Read-Out and complete with a mechanical counter and a hand wheel for fine adjustment.
A supporting rank at the rear of the machine and mounted below the cutting action allows easy material removal.
The Control Panel is conveniently located at the left side of the machine in the immediate reach of the operator and includes the following features;
Key switch on-off- Motor Start-Stop
- Counter of Strokes
- +/- Push Buttons for backguage operation
- Cutting Length adjustment
- Key switch cutting line illumination
Note: Backstop range from 10 to 750 mm for the guillotines ≤ 6mm
Backstop range from 10 to 915 mm for the guillotines > 6mm
Prices - Year 2011
| Machine Model | Price (£) |
| QC12Y-4*2000 | 10,360 |
| QC12Y-4*2500 | 10,935 |
| QC12Y-4*3200 | 11,510 |
| QC12Y-6*2000 | 11,165 |
| QC12Y-6*2500 | 12,085 |
| QC12Y-6*3250 | 13,810 |
| QC12Y-6*4000 | 17,265 |
| QC12Y-8*2500 | 13,465 |
| QC12Y-8*3200 | 15,885 |
| QC12Y-8*4000 | 18,415 |
| QC12Y-10*2500 | 16,920 |
| QC12Y-10*3200 | 18,645 |
| QC12Y-10*4000 | 23,595 |
| QC12Y-12*2500 | 17,495 |
| QC12Y-12*3200 | 18,645 |
| QC12Y-12*4000 | 25,320 |
| QC12Y-16*2500 | 24,400 |
| QC12Y-16*3200 | 27,045 |
| QC12Y-16*4000 | 32,800 |
| QC12Y-20*2500 | 27,045 |
| QC12Y-20*3200 | 33,030 |
| QC12Y-20*4000 | 38,205 |
Optional equipment
1. Pneumatic Sheet Supporting Table £528.00/M e.g.when selecting a 3M guillotine then the total cost is 3 x £528.00 = £1,584.00
2. Table mounted adjustment sheet angle stop £162.00
3. 5.7” LCD CNC Control £2,638.00
Touch Screen CNC Control – CNC start/stop push button – Single or Auto Mode
Input of Plate Thickness, Backguage Position and Cutting Length
Programmable setting of Backguage (no +/- push buttons as per standard features)
Digital Readout of actual Backguage position (no mechanical counter as per standard features)
4. Backguage with a 915mm travel £245.00
5. Go To backguage control £1,138.00
6. Ball Screw spindle in lieu of trapezium spindle £635.00
